Two types of wire straightening and cutting machines are offered:
- Roll feed type, where pairs of drive rollers are used to transport the wire through the straightening unit which could be spinner or roller type.
- Cam feed type, where reciprocating grippers pull the wire through the straightening unit which could be spinner or roller type.
The choice between the two types is dependant on production throughput required, the minimum cut length, and the required cut length accuracy. Consideration must also be given to the straightening unit size and type, material properties and diameter. Please consult the BDH team for advice on product selection for your specific application.
| * Based on Low Carbon Mild Steel up to 600N/mm² Max Tensile Strength | |||||||
| Machine Type | Model Name | * Max Wire ø Range (mm) | Min. Cut Length (mm) | Cut Length Accuracy (mm/m) | Straightness | * Max. M/C Speed (m/min) | |
|---|---|---|---|---|---|---|---|
| Roll Feed Machines | AV3 | 1.2 – 3 | 150 | +/- 0.5 | 0-1mm in 1m | 75 |  |
| AV6 | 1.6 – 6 | 150 | +/- 0.5 | 0-1mm in 1m | 75 | ||
| AV8 | 3 – 8 | 150 | +/- 0.75 | 0-1mm in 1m | 75 | ||
| AV10 | 4 – 10 | 150 | +/- 1 | 0-1mm in 1m | 75 | ||
| Cam Feed Machines | C05 | 0.3 – 1.6 | 5 | +/- 0.1 | 0-1mm in 1m | 16 |  |
| C1 | 1.6 – 6 | 20 | +/- 0.25 | 0-1mm in 1m | 16 |  |
|
| C3/1 | 3.2 – 9.5 | 20 | +/- 0.25 | 0-1mm in 1m | 16 | ||